Measuring yield-reducing plant water potential depressions in wheat by infrared thermometry

Summary Measurements of foliage and air wet- and dry-bulb temperatures were made over six differentially irrigated plots of Produra wheat grown at Phoenix, Arizona, in the spring of 1976. These data were used to evaluate a newly developed plant water stress index each day from the initiation of heading to the commencement of senescence. Daily measurements on total plant water potential were also obtained over this period; and after demonstrating how the atmospheric-induced component can be removed from these data, the resultant soil-induced component was plotted as a function of the new water stress index. The result was a simple linear relationship, which was found to be identical to one previously derived for alfalfa. Finally, it was shown that grain yield was directly related to the mean plant water stress index over the reproductive growth period from heading to senescence.Contribution from Agricultural Research, Science and Education Administration, US Department of AgricultureResearch physicist, soil scientist, research physicist, and research entomologist, respectively     

Die Nachhaltigkeit von Düngungssystemen — Dargestellt am seehausener Düngungs‐Kombinationsversuch

Der 1967 in Seehausen auf sandigem Lehm angelegte Düngungs‐Kombinationsversuch dient der Analyse von Langzeitwirkungen gestaffelter Stallmist‐ und Mineral‐N‐Gaben (0,50,100,150 kg N ha^?1 a^?1) auf Pflanzen, Boden und Umwelt. Anhand von Meß‐, Bilanz‐ und Simulationswerten wird die Nachhaltigkeit dieser Düngungsvarianten bewertet.

Organisch‐mineralische Düngung führte zu Maximalerträgen von über 12t TM ha^?1 a^?1 und N‐Entzügen bis 200 kg ha^?1 a^?1. Der N‐Entzug der ungedüngten Variante betrug in den letzten Jahren noch etwa 75 kg ha^?1a^?1 gegenüber 100 kg ha^?1a^?1 zu Versuchsbeginn.

Die Entwicklung der Boden‐N_t‐Gehalte konnte mit e‐Funktionen beschrieben werden. Mineral‐N allein genügte nicht zum Erhalt der N_t‐Ausgangsvorräte, hierfür waren 55 bis 85 kg Stalldung‐N ha^?1 a^?1 notwendig. Die N_t‐ und C_t‐Gehalte korrelierten mit zahlreichen Bodenparametern. Hohe Humusgehalte forderten die biologische Aktivität.

Die N‐Verluste betrugen <10kg ha^?1 a^?1 (ungedüngt) bis 120 kg ha^?1a^?1 (höchstgedüngte Variante). Das N‐Verlustpotential lag bei Stallmistanwendung etwas niedriger als bei gleicher N‐Zufuhr in Mineralform. Je nach Stallmist‐Stufe waren 62 bis 104 kg Mineral‐N ha^?1 a^?1 erforderlich, um den Energieeinsatz je Produkteinheit zu minimieren.

Kombinierte Anwendung organischer und mineralischer Dünger (je 100 kg N ha^?1 a^?1) führte zu höchsten ökonomischen Leistungen, günstigen Bodeneigenschaften und tolerierbaren Umweltwirkungen. Zieht man alle verwendeten Nachhaltigkeitskriterien in Betracht, ist dieses Düngungssystem den anderen überlegen.     

Freezing of stallion semen with addition of glycine betaine

The effect of addition of glycine betaine to a lactose-EDTA freezing medium on the post-thaw motility of stallion semen was determined. The first three semen-rich fractions of nine stallions were collected with an open-end Krakow artificial vagina on consecutive weekdays. Semen was frozen using the Hannover method with freezing media containing glycine betaine in various concentrations from 0 to 5%. After thawing, sperm motility was analysed both by a light microscope and by a Hamilton-Thorn Motility Analyser. Total and progressive post-thaw motilities of semen containing 0.25-3% glycine betaine did not differ significantly from the total and progressive post-thaw motilities of semen frozen without glycine betaine. The total and progressive post-thaw motilities of semen containing 4 or 5% glycine betaine were significantly lower (P < 0.001) than those of semen without glycine betaine. In conclusion, glycine betaine did not show any beneficial effect on the post-thaw motility of stallion semen when semen was frozen using the Hannover method.     

Diversity of Epidemic Populations of Gibberella zeae from Small Quadrats in Kansas and North Dakota

ABSTRACT Gibberella zeae (anamorph Fusarium graminearum) causes Fusarium head blight (FHB) of wheat and barley and has been responsible for several billion dollars of losses in the United States since the early 1990s. We isolated G. zeae from the top, middle, and bottom positions of wheat spikes collected from 0.25-m(2) quadrats during severe FHB epidemics in a single Kansas (KS) field (1993) and in a single North Dakota (ND) field (1994). Three amplified fragment length polymorphism (AFLP) primer pairs were used to resolve 94 polymorphic loci from 253 isolates. Members of a subset of 26 isolates also were tested for vegetative compatibility groups (VCGs). Both methods indicated high levels of genotypic variability and identified the same sets of isolates as probable clones. The mean number of AFLP multilocus haplotypes per head was approximately 1.8 in each population, but this value probably underestimates the true mean due to the small number of samples taken from each head. Isolates with the same AFLP haplotype often were recovered from different positions in a single head, but only rarely were such apparently clonal isolates recovered from more than one head within a quadrat, a pattern that is consistent with a genetically diverse initial inoculum and limited secondary spread. The KS and ND samples had no common AFLP haplotypes. All G. zeae isolates had high AFLP fingerprint similarity (>70%, unweighted pair group method with arithmetic means similarity) to reference isolates of G. zeae lineage 7. The genetic identity between the KS and ND populations was >99% and the estimated effective migration rate was high (Nm approximately 70). Tests for linkage disequilibrium provide little evidence for nonrandom associations between loci. Our results suggest that these populations are parts of a single, panmictic population that experiences frequent recombination. Our results also suggest that a variety of population sampling designs may be satisfactory for assessing diversity in this fungus.     

Effect of medetomidine administration on bispectral index measurements in dogs during anesthesia with isoflurane

OBJECTIVE: To determine the relationship between bispectral index (BIS) and minimum alveolar concentration (MAC) multiples of isoflurane after IM injection of medetomidine or saline (0.9% NaCl) solution in anesthetized dogs. ANIMALS: 6 dogs. PROCEDURE: Each dog was anesthetized 3 times with isoflurane. First, the MAC of isoflurane for each dog was determined by use of the tail clamp method. Second, anesthetized dogs were randomly assigned to receive an IM injection of medetomidine (8 microg x kg(-1)) or an equal volume of isotonic saline (0.9% NaCl) solution 30 minutes prior to beginning BIS measurements. Last, anesthetized dogs received the remaining treatment (medetomidine or isotonic saline solution). Dogs were anesthetized at each of 4 MAC multiples of isoflurane. Ventilation was controlled and atracurium (0.2 mg/kg followed by 6 microg/kg/min as a continuous infusion, IV) administered. After a 20-minute equilibration period at each MAC multiple of isoflurane, BIS data were collected for 5 minutes and median values of BIS calculated. RESULTS: BIS significantly decreased with increasing MAC multiples of isoflurane over the range of 0.8 to 2.0 MAC. Mean (+/- SD) MAC of isoflurane was 1.3 +/- 0.2%. During isoflurane-saline anesthesia, mean BIS measurements at 0.8, 1.0, 1.5, and 2.0 MAC were 65 +/- 8, 60 +/- 7 52 +/- 3, and 31 +/- 28, respectively. During isoflurane-medetomidine anesthesia, mean BIS measurements at 0.8, 1.0, 1.5, and 2.0 MAC were 77 +/- 4, 53 +/- 7, 31 +/- 24, and 9 +/- 20, respectively. CONCLUSIONS AND CLINICAL RELEVANCE: BIS monitoring in dogs anesthetized with isoflurane has a predictive value in regard to degree of CNS depression. During isoflurane anesthesia, our results support a MAC-reducing effect of medetomidine.     

Two-dimensional link-segment model of the forelimb of dogs at a walk

OBJECTIVE: To calculate normative joint angle, intersegmental forces, moment of force, and mechanical power at elbow, antebrachiocarpal, and metacarpophalangeal joints of dogs at a walk. ANIMALS: 6 clinically normal mixed-breed dogs. PROCEDURE: Kinetic data were collected via a force platform, and kinematic data were collected from forelimbs by use of 3-dimensional videography. Length, location of the center of mass, total mass, and mass moment of inertia about the center of mass were determined for each of 4 segments of the forelimb. Kinematic data and inertial properties were combined with vertical and craniocaudal ground reaction forces to calculate sagittal plane forces and moments across joints of interest throughout stance phase. Mechanical power was calculated as the product of net joint moment and the angular velocity. Joint angles were calculated directly from kinematic data. RESULTS: All joint intersegmental forces were similar to ground reaction forces, with a decrease in magnitude the more proximal the location of each joint. Flexor moments were observed at metacarpophalangeal and antebrachiocarpal joints, and extensor moments were observed at elbow and shoulder joints, which provided a net extensor support moment for the forelimb. Typical profiles of work existed for each joint. CONCLUSIONS AND CLINICAL RELEVANCE: For clinically normal dogs of a similar size at a walk, inverse dynamic calculation of intersegmental forces, moments of force, and mechanical power for forelimb joints yielded values of consistent patterns and magnitudes. These values may be used for comparison in evaluations of gait in other studies and in treatment of dogs with forelimb musculoskeletal disease.     

The effects of femoral stem and neck length on cement strains in a canine total hip replacement model

OBJECTIVE: To determine the effects of femoral prosthesis stem length and head size on cement strains in a canine hip replacement system. STUDY DESIGN: An in vitro experimental model. SAMPLE POPULATION: (1) Three standard and 3 1-cm shortened femoral implants with +3 femoral heads. (2) Two standard implants with +0, +3, and +6 femoral heads. METHODS: Femoral stems were embedded in polymethylmethacrylate cement. A uniaxial proximodistal-oriented strain gauge was applied to the cement on the medial and lateral aspects of the construct 1.5 cm, 6.0 cm and 7.0 cm distal to the collar. Each construct with a +3 femoral head was mounted in a materials testing system. An axial compressive load (0-200 N) was applied to the femoral head and cement strains were recorded. Additionally, 2 standard length constructs were also tested with +0 and +6 femoral heads. The effects of stem length and neck length on cement strains were assessed with analysis of variance. RESULTS: Strains increased at all locations with increasing loads for all constructs. Shorter implants had higher strains by 152% and 171%, lateral (P =.003) and medial (P =.0025) to the stem tip. No significant strain differences were noted, at any strain gauge location, between different neck lengths (P values ranged from.20 to.67). CONCLUSIONS: Although a shorter implant stem has a potential to improve implant fit, it led to significantly higher cement strains that may increase the risk for aseptic loosening. Changes in femoral neck length did not significantly affect cement strains under the conditions tested. CLINICAL RELEVANCE: Shortening of the femoral stem currently cannot be recommended in canine total hip replacement. The existing use of variable neck lengths likely does not increase the risk of failure of the femoral stem.     

In vitro biomechanical study of rotational stabilizers of the canine elbow joint

OBJECTIVE: To develop a model for measuring rotary stability of the canine elbow joint and to evaluate the relative contribution of the anconeal process (AN), lateral collateral ligament (LCL), and medial collateral ligament (MCL). SAMPLE POPULATION: 18 forelimbs from 12 canine cadavers. PROCEDURE: Forelimbs were allocated to 3 experimental groups (6 forelimbs/group). Each intact forelimb was placed in extension at an angle of 135 degrees and cycled 50 times from -16 degrees (pronation) to +28 degrees (supination) in a continuous manner at 2.0 Hz. Cycling was repeated following sectioning of the structure of interest (group 1, AN; group 2, LCL; and group 3, MCL). Torque at -12 degrees (pronation) and +18 degrees (supination) was measured for each intact and experimentally sectioned limb. A Student t test was performed to compare torque values obtained from intact verses experimentally sectioned limbs and for comparison with established criteria for differentiation of primary (> or = 33%), secondary (10 to 33%), and tertiary rotational stabilizers (< 10%). RESULTS: In pronation, the AN was the only primary stabilizer (65%). For supination, the LCL was a primary stabilizer (48%), AN was a secondary stabilizer (24%), and MCL was a tertiary stabilizer (7%). CONCLUSIONS AND CLINICAL RELEVANCE: With the elbow joint in extension at an angle of 135 degrees, the AN is a primary rotational stabilizer in pronation, and the LCL is a primary stabilizer in supination. Disruption of the AN or LCL may affect rotary range of motion or compromise stability of the elbow joint in dogs.